Containers moving on SS Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container.
To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards from bottom level of bottle towards neck during filling. The Digital filling system arrangement is standard features of the machine.
The motor for filling is servo drive and conveyor drive is AC Motor with synchronized variable AC Frequency Drive.
PLC Controller provided to set fill volume, speed of conveyor and set fill timing this means fill size can be easily set.
- Accuracy ± 0.8 % or 0.5Gram in single doze (Whichever is higher).
- No change parts require.
- Individual volume control for all syringes.
- Different speeds can be set, depending on fill volume and foaming nature of material.
- Body covered with SS sheet.
- All contact parts silicon tubing and S.S.316.
- A unit to fill variety of liquid and can be used for various type of containers.
- No dropping or last drop problem.
- No bottle no filling system.
- 25 Liter Holding Tank fitted with Machine.
- Facility provided for the fine tuning of the volume
- Inbuilt protection against over current, voltage fluctuation, short circuit in AC frequency Drive.
- Ideal for aseptic, sheer sensitive, viscous, and corrosive liquids also.
|Output||20-40 Bottles/Min (Depend on Fill Volume)||40-60 Bottles/Min (Depend on Fill Volume)|
|Electrical Characteristics||3.5 HP, 440 Volts, 3 Phase, 50 Hz, 4 Wire System||5.5 HP, 440 Volts, 3 Phase, 50 Hz, 4 Wire System|
|Direction of Movement||Left to Right|
|Number of Head/Nozzles||2 Head||4 Head|
|Fill Size||10ml to 1000ml||10ml to 1000ml|
|Height of Conveyor||860mm to 910mm Adjustable|
|Overall Dimension||1600mm L X 1110mm W X 1830mm H|
|Air Pressure||6 Bar Pressure @ 0.5 CFM|