Operation :

Ampoules feed from the Infeed tray are received on an Infeed Feed worm then moves on Infeed Star Wheel. The Grippers picks up the Ampoules from Infeed Star Wheel and invert it in neck down position over washing needles and move along with the needle bar for Washing. On completion of a cycle, washed ampoules are again inverted to neck upward position and feed to output star wheel. Washed ampoules received from output star wheel can be collected on Output Tray or can be pushed to tunnel.

Ampoule Washing Machine, Manufacturer  India
Technical Specification :
Model DRAW – 120 DRAW – 240
Output 60 to 120 Ampoules/Minute 120 to 240 Ampoules/Minute
Ampoule Diameter 9mm to 21.5mm 9mm to 21.5mm
Ampoule Height 60mm to 140mm 60mm to 140mm
Power Specification 4 HP, 3 Phase 50 Hz, 4 wire system 4 HP, 3 Phase 50 Hz, 4 wire system
Optional Accessories PLC with HMI PLC with HMI
Aluminum Profile Cabinet Aluminum Profile Cabinet
covering full machine covering full machine
Utility Air – 20 CFM Water – 200 to 500 Liter/Hour depend upon Ampoule size Air – 20 CFM Water –200 to 500 Liter/Hour depend upon Ampoule size
Water Tank & Pump 3 Nos. each with 25 Liters Capacity & Centrifugal Pump 3 Nos. each with 25 Liters Capacity &Centrifugal Pump
Overall Dimension 2050mm L x 2000mm W x 1210mm H 2450mm L x 2000mm W x 1300mm H
Salient Features:
  • All Contact parts made out from SS 316
  • Entire frame covers & non Contact parts made out from SS 304.
  • All finishes, welding joints are processed, treated & equipment selected in accordance with cGMP standards.
  • Suitable for 1ml to 25ml ampoule.
  • Low Water Consumption.
  • Quick Change over of parts for other size of Ampoule.
  • 3 Pumps and 3 Tanks of 25 liters Each
  • Washing sequence can be made as per customer’s requirements.
Washing Cycles :Internal/External
Washing Wash
1st wash Recycled Water(WFI)
2st wash Compressed Air
3rd wash DM water
4th wash Compressed Air
5th wash Water for Injection(WFI)
6th wash Compressed Air