Operation :

Bottles pushed from Infeed tray and then move on Wiremesh conveyor Belt, which align the Bottle in correct position, to enter into the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the Bottle inside pocket in mouth down position over spraying nozzles. Multijet sprayers fixed at the top cause the total External and Internal surface to be Washed. To avoid any possible cross contamination between two different waters. Each washing station is provided with an independent Circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the Bottles, Spraying Jets of water or compressed air then Return Down. The baskets movement then advances by one Station. Each station of Bottles passes through the washing cycles selected. The duly washed Bottles then delivered to the Out feed tray with neck opening upward and then automatically re ordered to a next Operation.

Automatic Linear Tunnel type Bottle Washing Machine

Technical Specification :

Model DBWT-100 DBWT-150


Output 50 to 100 Bottles/Min 100 to 150 Bottles/Min

100 to 200 Bottles/Min

200 to 250 Bottles/Min
No. of Pockets 10 12


Electrical Characteristics 3.5 HP, 415 Volts, 50 Hz, 3 Kw, 4 Wire System
Tank Capacity 80 Liter
Wash Cycle 3 Inner+1 Outer+1 Air
Water / Air Consumption 400 Liter/Hr/ Cycle/Pressure 2.5 Kg @ 20 CFM
Overall Dimensions (L x W x H) 1150 X 2500 X 1550 1450 X 2500 X 1550

1450 X 2500 X 1550

2900 X 2500 X 1130
Change Parts A) Neck Dia. Bottle Holding Pocket
B) Flat Container Size: Delivery Chute
Salient Features:
  • Machine structure made by SS 304 with argon welded. – SS filter housing & Nozzles made from SS 316.
  • Imported Gear Box, Main Drive and Conveyor. – Infeed Conveyor Belt system.
  • AC Variable Drives for Main drive and conveyor. – Pumps with tank (80 Liter Each) 2 Nos.
  • Special Pocket system ensures easy and trouble free washing of Bottles for outer & inner side. – Water recycling arrangement is possible as per client’s requirement.
  • A special clutch device is available for stoppage of the machine in the event, Bottles is over turned or over diameter. – Machine also equipped with external washing of Bottles.
  • Machine provided with PLC (OPTIONAL) as per customer requirement.